NOTE – if your Africa Twin has a restrictor plate in the filler neck (like the photo at left) the filter will fit. Watch this install video:
No upper flange – instead the upper neck ring snugs down into the tapered fuel tank filler nozzle
Neck size 37mm
Filter size 4″x8″
Filter bag is centered on the nozzle
Filer has an anti-abrasion outer mesh to protect against chafing inside the tank
INNOVATIVE HDM3D MEDIA WITH WELDED FILTER EDGES FOR THE BEST DIRT/WATER SEGREGATION HUGE XL+ SURFACE
Special fuel neck prefilter designed to be mounted inside the original fuel cap, simple drop-in easy to insert and extract, no further modifications or mountings.
Expedition media, XL+ 600 square cm of filtering surface, simply mounting and fast refueling, washable and long lasting.
HDM3D media will allow a very good protection of the fuel pump and main filter, Acquastop separating water from fuel during refueling.
For EFI systems, the original system has a strainer working between 40 and 60 microns, using a nylon mesh that’s totally inadequate to protect the fuel pump.
Carbureted bike will be protected from any contaminants and water during refueling.
This filtration level will preserve the fuel pump and prolong the original fuel filter.
Double-check your bike’s make, model, year, gas tank design, filler nozzle, etc. before ordering.
Take careful measurements of your filler nozzle and confirm for proper fitment. (see measurements of filter above).
If you order the wrong filter you’re responsible for any shipping fees needed to replace it with the proper filter, plus any price differences.
Filters that have been immersed in gas (or are not in like-new condition) are NOT eligible for return or refund.