Description

This kit contains 2 Forksaver sleeves that fit the BMW F800GS, with an upper tube diameter of 56mm.

These Forksaver sleeves have elastic bands that gathers the nylon and prevents contact with both brake rotors.  Overall sleeve length is 23 cm.

To install, remove the forks, slip the sleeve onto the upper tube so the silicone band is about 3/4″ above the swollen area where the fork seal is located.  Then pull the nylon sleeve down, over the slider.  Finally, slip the O-ring down from the top and use it to secure the end nearest the axle.  Reinstall the fork, tighten everything, and check for proper clearance.

Available in BLACK only, comes 2 sleeves per kit.

Now in stock!