Description

Fits KTM 950/990 twin pack X-Gen.  Photo actually shows the M00016 without the anti-abrasion mesh, but the basic design is the same.

These filters have an extra layer of filtering material PLUS an anti-abrasion armored mesh on the outside (not shown in this photo)

Flange diameter 102mm (typical Zadi cap)
Filter neck diameter 52mm
Filter bag sizes 4×8″
Filter bags are offset on the Zadi caps so they fit properly in your tank.

TWIN SET of Fuel Filter – HDM3D directly mounted ON THE ORIGINAL KTM/ZADI FLANGES INNOVATIVE FILTER WITH WELDED EDGES FOR THE BEST DIRT/WATER SEGREGATION & BIGGER XL+ SURFACE

This is THE setup for the serious 950/990 rider.  Extra large filters make for faster re-fueling.  Anti-abrasion netting prevents the filter bag from rubbing against the inside of the tank under extreme riding conditions.  This filtering system isn’t for sissies.  Proof of riding competency, or a note from at least 2 riding buddies may be required for purchase.  LOL.

Fuel Filter with HDM3D Media with welded edges, easy to install thanks the direct mounting on the original neck flange.

Thanks to its design and special media, refueling is very fast, filter is very effective and you will never have fuel splash in your face while refueling.

The new and innovative media combines a very fast refueling with an exceptional filtering efficiency capable of protecting your EFI from most any kind of solid contamination and 100% water separation.

Double-check your bike’s make, model, year, gas tank design, filler nozzle, etc. before ordering.
Take careful measurements of your filler nozzle and confirm for proper fitment. (see measurements of filter above).
If you order the wrong filter you’re responsible for any shipping fees needed to replace it with the proper filter, plus any price differences.
Filters that have been immersed in gas (or are not in like-new condition) are NOT eligible for return or refund.