Mazinga “TEABAG” FUEL FILTER FOR KTM 690 and Husky 701
Note that the photo shows a filter for the 790 – it’s the same application.
This filter is in addition to any Guglatech pre-filter you might install in the neck of your fuel tank.
Guglatech video showing the Mazinga filter installation
With this filter in place, AND the gas tank filte in place, you can remove the stock KTM plastic strainer from the fuel pump. We don’t recommend removing that strainer unless you use both Guglatech components.
The exclusive and innovative multi layer design allows a great protection and most importantly the biggest surface/flow capability. Mazinga has been designed to work ONLY with our neck prefilter (specific model for each bike) .
This combination will eliminate all kinds of fuel pump maintenance, thus no more tank opening ever again. The Mazinga slips over the fuel pump assembly. REMOVE the OEM strainer (below left).
Other benefits are:-much better fuel flow;
- -no more fuel pressure drop;
- -no fuel pump “stress”;
- fuel pump increased its life span;
- much better throttle response;
Install Alert – Do not position the seam on top of the draining hole, push over the matrix and make sure the seam is positioned anywhere else on the body’s 4 sides.