Description

Fits BMW R1100GS, R1150GS, R1200GS  that have the metal filler nozzle as shown below.
Also fits most K1300 and K1200

Fitment notes:  You must remove the metal nozzle and fit this filter onto the inside of nozzle.  This filter is Armored for abrasion protection, and the new design allows for faster fueling.

Filter has no upper flange; it fits onto the nozzle of the fuel filler tube
Filter size 6.5″x8″
Filter bag is centered on the filler tube
Top of filter is intentionally left unsewn to allow the filter to fit onto the tube
Aluminum wire retainer wire holds filter onto the tube.

INNOVATIVE HDM3D ACQUASTOP WELDED FILTER EDGES FOR THE BEST DIRT/WATER SEGREGATION BIG XL+ SURFACE

Special fuel neck prefilter designed to be mounted inside the original fuel cap, simple drop-in easy to insert and extract, no further modifications or mountings.

Expedition media, XL+ 600 square cm of filtering surface, simply mounting and fast refueling, washable and long lasting.

The HDM3D Media will allow a very good protection of the fuel pump and main filter, Acquastop separating water from fuel during refueling.

The original system has a strainer working between 40 microns, plus the other more sensitive filter is a nylon mesh which is totally inadequate to protect the fuel pump.

This filtration level will both preserve the fuel pump and prolong the original fuel filter.

Double-check your bike’s make, model, year, gas tank design, filler nozzle, etc. before ordering. 
Take careful measurements of your filler nozzle and confirm for proper fitment. (see measurements of filter above).
If you order the wrong filter you’re responsible for any shipping fees needed to replace it with the proper filter, plus any price differences.
Filters that have been immersed in gas (or are not in like-new condition) are NOT eligible for return or refund.